China Wholesale Dongnan Micro Switch Pricelist – DK4-BD-005 – Tongda
China Wholesale Dongnan Micro Switch Pricelist – DK4-BD-005 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
|
(Free Position) |
FP |
mm |
(Operating Position) |
OP |
mm |
|
(Releasing Position) |
RP |
mm |
|
(Total travel Position) |
TTP |
mm |
|
(Operating Force) |
OF |
N |
|
(Releasing Force) |
RF |
N |
|
(Total travel Force) |
TTF |
N |
|
(Pre Travel) |
PT |
mm |
|
(Over Travel) |
OT |
mm |
|
(Movement Differential) |
MD |
mm |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 10(1.5)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
(between terminals and the metal frame) | 1500V/0.5mA/60S | ||
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥3000000 cycles | |
7 |
(Operating Temperature) | -25~105℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles(Mechanical):60 cycles | |
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability): (More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃(Immersing Time):2~3S | |
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S(Manual Soldering):300±5℃ 2~3S | |
12 |
(Safety Approvals) |
UL、CSA、TUV、ENEC |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃(Relative Humidity):65±5%RH
(Air Pressure):86~106KPa |
Product detail pictures:

Related Product Guide:
We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for China Wholesale Dongnan Micro Switch Pricelist – DK4-BD-005 – Tongda , The product will supply to all over the world, such as: Kyrgyzstan , kazan , Albania , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.

Write your message here and send it to us